Hotline:0755-22277778
Tel:0755-22277778
Mobile:13826586185(Mr.Duan)
Fax:0755-22277776
E-mail:duanlian@xianjinyuan.cn
Conductive adhesive XJY-D6
Product Introduction
Conductive silver copper powder with good resistance, silver coated copper powder, spherical conductive powder, conductive powder, conductive adhesive D-6 is a high-temperature rapid curing single component epoxy conductive adhesive produced by Advanced Institute (Shenzhen) Technology Co., Ltd. It is composed of conductive metal powder and epoxy resin adhesive that can be cured at high temperatures, and is suitable for conductive connections of various electronic components.
Typical applications
Conductive connections of electronic components, repair of printed circuits, etc.
General characteristics
This product can cure in 5 minutes at a medium temperature of 150 ℃, with fast curing speed, high bonding strength, low electrical resistivity, and recommended dispensing needle diameter of 0.2-0.5 millimeters.
Technical indicators
Physical performance indicators |
test method |
Testing standards |
||
Appearance |
Visual observation |
Grey black paste |
||
Packing material |
Conductive metal powder |
|||
Adhesive |
Modified epoxy resin |
|||
Odor |
nothing |
|||
Viscosity (Pa. S) |
BROOKFIELD DV-I VISCOMETER,S14 ,5rpm,@ 25℃, Pa.s |
5000~15000 |
||
Solid content (Wt%) |
Bake at 150 ℃ for 1 minute |
86-88% |
||
Volume resistivity, Ω· cm |
DC single bridge |
1-5×10-4 |
||
Shear strength (Al Al), MPa |
Tensile testing machine |
>8 |
||
Curing conditions |
Blast oven |
150 ℃/1 minute |
||
Useful life |
At this temperature, after being left for 10 hours, the viscosity does not increase by more than 2 times |
25 ℃, away from light,>24 hours |
||
Storage life |
-40 ℃, away from light,>4 months |
Instructions and guidance for use
A) Preparation work
1. Before opening the lid, remove the conductive adhesive from the freezer and leave it at room temperature (around 25 ℃) for at least one hour;
2. When opening the lid, be sure to avoid water droplets from seeping into the glue outside the container, as there may be air leaks and frost on the inner wall of the container, which can cause water vapor or water droplets to enter and affect its characteristics;
3. Viscosity adjustment: Do not adjust the viscosity as the addition of any solvent may affect its properties;
B) Use
Recommend using a precision dispensing machine. For example: dispensing machine, needle: NO.23C (inner diameter 0.4mm); Air pressure: 1-2 × 10-1pa (1-2kg/cm2).
C) Operation guidance
1. Glue must maintain sufficient wetting ability with the bonding surface to ensure sufficient adhesion.
2. After using the conductive silver adhesive, tightly cover the lid and store it in a -40 ℃ freezer.
Storage conditions and shelf life
-40 ℃, away from light, shelf life>4 months; Room temperature 25 ℃, away from light, for more than 24 hours. Without avoiding light, the shelf life and usage time will be shortened by 10-30%.
Packaging method
Plastic bottles: 50G, 200G, 500g.
The label is marked with the factory name, product name, model, production batch number, and weight.
Safety operation standards
Carefully read the product instructions, preventive measures, and first aid measures before use;
If this product comes into contact with the skin, it should be promptly washed with water and soap.
Advanced Institute (Shenzhen) Technology Co., Ltd, © two thousand and twenty-onewww.leird.cn. All rights reservedGuangdong ICP No. 2021051947-1 © two thousand and twenty-onewww.xianjinyuan.cn. All rights reservedGuangdong ICP No. 2021051947-2