How to optimize the use of flexible conductive adhesive in electronic products

Single component thermoplastic conductive adhesiveThe main components are thermoplastic adhesive, conductive carbon powder, and solvent, which are bonded by heating. This product has low viscosity, smooth dispensing, and does not flow after dispensing. It has shape retention (after dispensing, the adhesive points do not collapse, deform, or diffuse) and good conductivity after curing. It has excellent adhesion to materials such as metal, glass, and ceramics. Mainly used for LCM bonding.

Features Special Features

U single component, thermoplastic type

Good conductivity and stable resistance

During low-temperature storage, the carbon powder does not sink

U has good adhesion to various materials

Smooth dispensing without drawing or trailing

U has strong flexibility, bending resistance, and good impact resistance

Application purpose

Conductive bonding of electronic components

Properties before curing

Properties after curing

Preparation method of test piece: Prepare a test strip with a width of 1cm, a thickness of 25um, and a length of 5cm. After curing at 80 ℃ for 30 minutes, test the volume resistance.

Direction for use usage guide

Please wipe off the moisture, oil, rust and other dirt on the surface of the parts that need to be bonded, and then apply glue. Surface dirt will greatly reduce the bonding strength.

Use an automatic glue dispenser to apply glue.

Storage conditions

This product belongs to thermosetting resin, with a high density of carbon powder that is prone to sinking, resulting in uneven performance. Therefore, low-temperature storage is beneficial for extending the shelf life. It is recommended to store it frozen, with the optimal storage temperature being -10 ℃ to 5 ℃ and a shelf life of 6 months. Before opening, the lid must be allowed to warm up at room temperature for 2-4 hours. After opening, keep the opening clean and sealed, and use it as soon as possible.

Caution precautions

Please keep it out of reach of children.

When using, it is necessary to wear protective equipment such as masks, gloves, eye masks, etc., and use them in places with good ventilation or exhaust systems.

If you accidentally come into contact with your eyes or skin, please rinse with water and seek medical treatment.

Stop using this product immediately and seek medical treatment if you are allergic or have abnormal sensations.

Please do not use it for medical devices or for purposes that come into contact with the human body.

Note Declaration

The technical data recorded in this article are measured values obtained based on the corresponding Chinese national standards and our company's experimental conditions and methods. We cannot guarantee that other companies will obtain the same results from testing.

Before using this product, users should fully verify its scope of application and purpose, carefully read the SDS of this product, confirm the chemical hazards contained in this product, and take corresponding safety protection measures. We do not assume responsibility for safety and health accidents caused by misuse or misoperation.

Packaging specifications

1kg/bottle