Hotline:0755-22277778
Tel:0755-22277778
Mobile:13826586185(Mr.Duan)
Fax:0755-22277776
E-mail:duanlian@xianjinyuan.cn
Project |
Company |
test method |
test result |
Color Color |
No |
Visual |
yellow |
Thickness |
mm |
ASTM D374 |
0.3~20mm |
Density |
g/cc |
ASTM D792 |
1.8±0.3 |
Hardness |
Shore C |
ASTM D2240 |
15~50 |
Continuous use temperature range |
℃ |
—— |
-40~ 200 |
Breakdown voltage |
Vac/mm |
ASTM D149 |
>5000 |
Volume Resistance |
Ω.cm |
ASTM D257 |
>1.2×1511 |
Flame Rating |
No |
U.L. 94 |
V-0 |
Thermal Conductivity |
W/m-K |
ASTM D5470 |
1.0 |
Main features: |
Thermal pads have good thermal conductivity, high compression ratio, softness and elasticity, self-adhesive, insulation, and are easy to operate. |
High cost-effective thermal conductive material F100 thermal pad |
|
Application areas: |
Between semiconductor and heat sink; |
Thermal conduction between power devices and casings or other heat sinks; |
|
Gap filling, thermal conductivity, and insulation between the power amplifier tube and the radiator; |
|
Heat dissipation applications that require stress or vibration absorption, shock resistance, insulation, and thermal conductivity; |
|
Applied to the communication industry, laptops, control motherboards LCD-TV、 High power supply, LED lighting, etc. |
|
Practical thermal conductive material F100 thermal pad |
|
usage method: |
The customer selects a thermal pad with appropriate thickness, size, and thermal conductivity based on the actual situation. To achieve the desired effect, the surface of the component should be maintained |
Clean, free of grease and impurities, remove the protective film during use, then apply pressure to the surface of the heating element to ensure a tight fit, |
|
Fully contact with the radiator or casing to achieve the desired effect. |
|
Feihongda Thermal Conductive Material F100 Thermal Conductive Pad |
|
Advantages: |
The thermal conductivity can be selected from low to high, and the commonly used thickness of the product is 0.3-8mm. The thickness can be customized according to customer requirements, and some models can reach a thickness of 20mm |
Colors and specifications can be produced according to customer requirements, and can be die cut into different shapes and sizes according to application environment requirements. They can be labeled according to customer samples |
Advanced Institute (Shenzhen) Technology Co., Ltd, © two thousand and twenty-onewww.leird.cn. All rights reservedGuangdong ICP No. 2021051947-1 © two thousand and twenty-onewww.xianjinyuan.cn. All rights reservedGuangdong ICP No. 2021051947-2