Wechat QRcode
Hotline:0755-22277778
Tel：0755-22277778
Mobile：13826586185（Mr.Duan）
Fax：0755-22277776
E-mail：duanlian@xianjinyuan.cn
Conductive silver paste for surface mount resistor electrodes, automotive glass defogging wire, heated silver paste, piezoelectric ceramic electrode, silver pasteWholesale Product Specification
| Product/product: |
Package paste |
| Part number/part number: |
09L-4406 |
This slurry is suitable for external labeling and outer packaging of circuits and resistors, and can be used for substrates such as glass, ceramics, stainless steel, aluminum alloys, etc
The paste is suitable for marking thick film circuit and outside package, glass, ceramic, metal, etc.
| base material Substrate |
Thick film circuits, glass, ceramics, metals, etc thick film circuit, glass, ceramic, metal, etc. |
| usage method Method of use |
Printing, 200-250 mesh Printing, 200-250mesh |
| Leveling Levelling |
5-10min minutes at room temperature Level at room temperature for 5-10 minutes (depending on the actual leveling situation). |
| Bake in a ventilated oven at 150-200 ℃ for 20-30 minutes |
|
| solidification Curing conditions |
The curing temperature can be within the range of 150-200 ℃, and the curing time can be determined according to the actual situation 150~200℃, 20-30 min ( It could be cured at a temperature between 150~ 200°C, but it depends of the thickness and the substrate.) |
| diluent Thinner |
ST-1001 |
Performance/Characteristics:
1. Slurry performance/Paste characteristics:
| performance Characteristic |
Standard Standard |
Testing methods and conditions Test method and conditions |
|
| 1 |
fineness Fineness |
≤8μm |
FOG test |
| 2 |
viscosity Viscosity |
80~150Pa.s |
Brookfield HBT utility cup and spindle (SC4-14/6R), 10rpm, 25±1℃， Brookfield HBT viscometer, rotor SC4-14/6R), 10rpm, 25±1℃ |
| 3 |
Appearance appearance |
White, black, blue, green white, black，blue, green |
|
Under sintering conditions 1, Check fired film produced under the conditions specified in 1）,
| characteristic Characteristics |
Standard standard |
Testing methods and conditions Test method and conditions |
|
| 4 |
Acid resistance Acid resistance |
Fine good |
Marinate in 5% H2S04, 30mins, no difference with standard sample 5% sulfuric acid, no change for 30 minutes |
| 5 |
Insulation resistance Insulation coefficient |
---- |
RCJ-30 |
| 6 |
Breakdown voltage breakdown voltage |
---- |
CS262673A |
The product should be stored in a sealed environment at a temperature of 5-15 ℃, with a shelf life of 1 year from the date of shipment.
The product shall be guaranteed for 1 year after shipping date, keep tightly under at 5-15℃
Standard packaging, 1000g/can, sample can be provided in 200g small can packaging
Standard package 1000
Advanced Institute (Shenzhen) Technology Co., Ltd， © two thousand and twenty-onewww.leird.cn. All rights reservedGuangdong ICP No. 2021051947-1 © two thousand and twenty-onewww.xianjinyuan.cn. All rights reservedGuangdong ICP No. 2021051947-2